ProTran1   Approval
Proudly Made in USA
 

 

 

 

 

Dead Man Collision Avoidance

MODEL 0072

Dead Man Collision Avoidance
SPECIFICATIONS (TD)

FCC APPROVED

Click To Zoom
  DESCRIPTION DIMENSIONS
Warranty

Developed with two features in one.  Dead man to keep the vehicle operators attention and fight fatigue factors and to warn the operator, other vehicles and workers of a potential collision.

As the vehicle is under operation and moving at a speed greater than 5MPH the system becomes active.  The operator has to acknowledge the system every 30 seconds by either the foot peddle or hand pushbutton.  If no acknowledge is given a visual alarm to the cab operator is activated, the system requests additional acknowledgements in 15 and 5 second increments.  If no acknowledgements are given, the  operator is given an audible alarm and at the same time the system goes into full alarm  turning on outside vehicle warning lights and sending a wireless signal to other vehicles, work machines and workers within the potential path of the moving vehicle.

The system comes with several features.  Setting range from 20 to 1000 feet of advance warning , visual and audible alarm in operators cab,  roof mounted wireless visual alarm, 30 second reset hand and foot peddle acknowledgement, N/O, N/C contacts for other customers activation devices and a 5MPH speed activation sensor.

Instruction Manual
 
Printable brochure
Address: P.O. Box 659 Flanders, NJ 07836
Phone 609-704-1737 Fax 609-704-0565 protran1sf@aol.com
Copyright 1999-2012 PROTRAN1, All rights reserved.
-